Lewitt Audio MTP 840 DM

Super focused sound on stage.


Lewitt Audio MTP 840 DM

  • Dynamic vocal microphone
  • Active mode to boost sensitivity
  • Tailored vocal sound
  • Low-cut settings
  • Supercardioid pattern

Included: Microphone clip, Windscreen, Transport bag

Your mic cuts through the densest of live mixes.

The MTP 840 DM is a supercardioid handheld performance microphone. Its tailored frequency response ensures that your vocals will cut through every mix. The unique Active Mode boosts sensitivity by up to 12 dB while output impedance stays low.

Refined electronics and superior capsule design make the MTP 840 DM a unique tool for onstage use.

Active mode to boost sensitivity

Give your signal some extra gain.

Boost your signal by up to 12 dB via a phantom-powered amplifier in Active Mode for ear-catching realism and distortion-free sonic depth.

Tailored vocal sound

Plug in and rock. No EQ is required.

We tailored the frequency response to make your vocals cut through even the densest mix, with great presence and clarity.

Plus, you do not require an EQ to be heard. Just plug it in and perform.

Low-cut settings

Improve clarity.

Remove the mesh, and you’ll find switches to activate a low-cut at 150 Hz or 250 Hz to reduce structure-borne noise. You can tame the proximity effect and adapt the mic to your individual preference.

Supercardioid polar pattern

Be fully protected against feedback.

The supercardioid polar pattern allows for high gain before feedback and guarantees maximum isolation of your voice – side and rear sounds are effectively rejected.


Dynamic, moving coil
Acoustical operating principle
Pressure gradient transducer
Polar pattern
Frequency range
40 … 18,000 Hz
3.5 mV/Pa, -49 dBV/Pa
Signal/noise ratio
75 dB (A)
19 dB (A)
Dynamic range, passive mode
135 dB
Dynamic range, active mode
121 dB, 0 dB gain
115 dB, 6 dB gain
109 dB, 12 dB gain
Gain settings, active mode
0 dB, 6 dB, 12 dB
Low-cut filter
150 Hz (12 dB/oct)
250 Hz (12 dB/oct)
Internal impedance
600 Ω
Supply voltage
48 V ± 4 V
Current consumption
5.5 mA
Gold-plated 3-pin XLR
Microphone dimensions
51 dia. x 183 mm, 2 dia. x 7.2 in
Microphone net weight
336 g, 11.85 oz

Microphones measured according to IEC 60268-4 | Phantom power according to IEC 61938 | Noise measurement according to IEC 60268-1


There are no reviews yet.

Be the first to review “Lewitt Audio MTP 840 DM”

Your email address will not be published. Required fields are marked *