Microtech Gefell M 930 Ts

Studio Microphone

Description

Microtech Gefell M 930 Ts

  • condenser microphone
  • cardioid
  • large diaphragm capsule
  • PE diaphragm
  • transistor pre-amplifier
  • phantom powering P48

specification

The studio microphone M 930 Ts unifies approved large diaphragm capsule technology with an optimized output transformer and a newly developed circuit design. That attains a signal transmission with negligible distortion combined with a lower low-frequency response, a very low noise floor, and a high sound pressure level even at a high external load.Because of the compact dimensions of the M 930 Ts, it is ideally suited for applications where optical inconspicuousness and an absolute view of manuscripts and monitors are demanded. It can be placed on speaker desks in radio stations as well as for recordings of dialog pickups, audiobooks, and in dubbing studios. Moreover, it can be used as the main microphone for recordings of solo instruments or vocals, as a spot microphone for recording instrumental groups, and for setting up multichannel main microphone arrangements. There are accessories for XY-, ORTF- and INA 5 arrangements available. Because of the balanced low-impedance transformer output, the M 930 Ts can be used for longer cable lengths with negligible distortion.

technical data

Polar pattern cardioid
Acoustic operating principle pressure gradient transducer
Frequency range 20 Hz to 20.000 Hz
Sensitivity at 1 kHz 23 mV/Pa
Output impedance 40 Ohm
Noise level CCIR 468-4 18 dB
DIN EN 60268-4 7 dB-A
Signal-to-noise ratio CCIR weighted 81 dB
A-weighted 87 dB
SPL for THD 0,5 % 142 dB
Max. output level R = 1 kOhm 18 dBu
R = 10 kOhm 21 dBu
Dynamic range 135 dB
> 60 dB
Current consumption 6 mA
Output connector XLR3M
Weight 273 g
Length 130 mm
Diameter 45 mm
Surface satin nickel, dark bronze

product contents

with microphone holder MH 93.1 in a wooden case 180 mm x 106 mm x 78 mm

Additional information

Weight 1 lbs
Dimensions 6 in