Speck Electronics ASC-V


What is the ASC-V ?

The ASC-V is a professional single channel 4-band equalizer in a 5.25” vertical module compatible with API Audio® 500 series rack frames. It is simple… it is useful… and it delivers the high quality and specifications found in all Speck Electronics gear.
This compact 4-band parametric equalizer has 12 controls for equalization adjustment that covers the audio spectrum from a low 25Hz all the way up to 25kHz. To enhance the classic EQ experience, the ASC-V offers both transformer-balanced and active-balanced outputs.

4 Sweepable Bands
L Band – a low band that sweeps the low frequencies from 25Hz – 400Hz. This band offers a Peak/Shelf select switch.
L/M Band – a switchable low and mid band. This fully parametric section can be switched between a low frequency band that sweeps from 40Hz – 800Hz, or a mid frequency band that sweeps 400Hz – 8kHz. This band has a variable bandwidth adjustment.
M Band – a fully parametric mid band with a frequency sweep range from 400Hz to 10kHz.
H Band – a high band that adjusts the high frequency from 2kHz all the way up to 25kHz. This band also offers a Peak/Shelf select switch

The Rear Panel
In addition to the standard rack friendly edge connector, the ASC-V has a set of 1/4″ TRS input/output jacks, and a power input connector. With these I/O connectors and the optional power module, you can ignore the PC edge connector and use the ASC-V as a stand alone EQ. Connect the ASC-V to virtually any line level source; balanced, unbalanced, or mixer inserts. The Model ASC-V has high headroom that will handle balanced signals up to +28dBu.

We even offer a mounting base that will hold a single EQ or a pair of the ASC-V’s.

Unified 5.25″ vertical module format that is compatible with API Audio® racks.

· Unique design allows module to be operated without rack. Can be self-powered and has 1/4″ TRS I/O jacks.

· Transformer and Active-balanced outputs.

· Optional base kit can hold 1 or 2 ASC-V’s for tabletop operation.

· Captive mounting screws stay with the module and extend to pull the module out of the rack.

Frequency Response
2Hz-135kHz (+0/-3dB)
.0014% @ +24 dBu
Residual Noise
-102dBu (22Hz-22kHz)
Maximum Input/Output Level
+28dBu /+28dBu
Input Impedance
30K Ohms (Balanced)
15K Ohms (Unbalanced
Output Impedance
600 Ohms (Transformer-balanced
60 Ohms (Active-balanced)
HxWxD=5.25″ x 1.59″ x 5.9″
(133mm x 38mm x 150mm)
Rack Power Requirements
+/- 16VDC @ 35ma
External AC Power Suply
120VAC or 230VAC

Additional information

Dimensions 6 × 2 × 6 in