The Schoeps CCM 2S exhibits a slight high-frequency emphasis for frontal sound incidence, with only a slight roll-off of high frequencies off axis and in the reverberant sound field.
The frequency response characteristic of the CCM 2S falls between that of the CCM 2 and the CCM 2XS, making this microphone suitable for a wide range of applications.
- omnidirectional pattern
- slight high-frequency rise to compensate for losses at moderate recording distances
- for a very wide range of recording applications
- often preferred for spaced stereophony and Decca Tree arrangements
The CCM 2S has proven particularly useful in two- and three-microphone stereo arrays, where its placement near the reverberation radius of the sound field presents a sonically balanced pickup favored by many recording engineers. This model has become our most popular pressure transducer.
For spaced microphone (A/B) stereo recording and especially the Decca Tree method, KA 40 accessory spheres are recommended.
|Frequency range||see the corresponding capsule|
|Sensitivity||see the corresponding capsule|
|Maximum sound pressure level (THD < 0.5 %)||136 dB-SPL (P48)
128 dB-SPL (P12)
|Maximum output voltage||2,6 V (8,3 dbV) with 2 kΩ load|
|Low cut filter||20 Hz, 12 dB/Okt.|
|Output impedance||90 Ω @ 1 kHz|
|Maximum cable length||> 400 m|
|SCHOEPS RFI Shield||No|
|Powering standard / Valid range||P48 / > 40 V P12 / > 10 V|
|Current consumption||4 mA (P48)
3,6 mA (P12)
|Common mode rejection ratio (at 1 kHz)||> 55 dB|
|Minimum recommended load impedance||2 kΩ|
|Output||Lemo (CCM-L) or XLR-3M (CCM-U),
analog, 1 channel
|Length||46 mm (CCM-L)|
|Weight||33 g (CCM-L)|
|Surface finish||matte gray (g)
or custom color