Fulcrum Acoustic DX12 – Dual 12” Coaxial Loudspeaker

Fulcrum Acoustic TQ Install Speaker. Please specify coverage.

Description

The Fulcrum Acoustic DX Series 3-way loudspeakers provide the output and pattern control of two low-frequency transducers in an enclosure size that would typically house a conventional 2-way system. They include a single-neodymium-magnet coaxial transducer and a powerful ceramic magnet low-frequency transducer. The two low-frequency devices both operate down to the lowest frequencies, resulting in a mutual coupling that provides unusually high efficiency and impacts in the critical 80 Hz to 500 Hz range. The dual 12-inch models offer a choice of 60° x 45°, 75° x 75°, 90° x 45°, or 120° x 60° horns.

Available in:

60° x 45°

75° x 75°

90° x 45°

120° x 60°

 

60° x 45° Coverage Pattern

Optional YK2813 Yoke Bracket available
  • Operating Mode: Bi-amplified w/ DSP
  • Operating Range: 50 Hz to 20 kHz
  • LF Transducers: 12.0″ ceramic magnet woofer, 3.0″ voice coil
  • HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
  • Power Handling at Nominal Impedance: LF 350 @ 8 Ω, HF/LF 400 W @ 8 Ω
  • Equalized Maximum SPL (peak / continuous): 133 dB / 127 dB

The DX1265 is a bi-amplified, 3-way coaxial loudspeaker that provides the output and pattern control of two 12 inch transducers in an enclosure size that would typically house a conventional 2-way system. Its coaxial transducer and 60° x 45° horn can be rotated in 45° increments, which allows its coverage to be tailored to an application’s requirements. The enclosure’s 40° trapezoidal shape may be mounted close to walls or in tight-packed horizontal arrays; alternatively, the enclosure may be rotated for mounting close to ceilings or in tight-packed vertical arrays.

Fulcrum Acoustic’s TQ™ processing is an integral part of the DX1265 design. Sound, innovative acoustical design combined with state of the art digital processing leads to the exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms.

The DX1265 is particularly effective in systems where targeted pattern control is desirable, and is an excellent solution for high fidelity, foreground distributed systems. Its clean aesthetic and compact size complements many architectural styles, which facilitates acceptance by interior designers and architects. This makes it the perfect choice for houses of worship, theaters, night clubs, transportation facilities, theme parks, and more.

 

75° x 75° Coverage Pattern

Optional YK2813 Yoke Bracket available
  • Operating Mode: Bi-amplified w/ DSP
  • Operating Range: 50 Hz to 20 kHz
  • LF Transducers: 12.0″ ceramic magnet woofer, 3.0″ voice coil
  • HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
  • Power Handling at Nominal Impedance: LF 350 @ 8 Ω, HF/LF 400 W @ 8 Ω
  • Equalized Maximum SPL (peak / continuous): 132 dB / 126 dB

The DX1277 is a bi-amplified, 3-way coaxial loudspeaker that provides the output and pattern control of two 12 inch transducers in an enclosure size that would typically house a conventional 2-way system. Its coaxial transducer and 75° x 75° horn provide effective coverage in situations where traditional 45° and 60° vertical patterns are too narrow. The enclosure’s 40° trapezoidal shape may be mounted close to walls or in tight-packed horizontal arrays; alternatively, the enclosure may be rotated for mounting close to ceilings or in tight-packed vertical arrays.

Fulcrum Acoustic’s TQ™ processing is an integral part of the DX1277 design. Sound, innovative acoustical design combined with state of the art digital processing leads to the exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms.

The DX1277 is particularly effective in systems where targeted pattern control is desirable, and is an excellent solution for high fidelity, foreground distributed systems. Its clean aesthetic and compact size complements many architectural styles, which facilitates acceptance by interior designers and architects. This makes it the perfect choice for houses of worship, theaters, night clubs, transportation facilities, theme parks, and more.

90° x 45° Coverage Pattern

Optional YK2813 Yoke Bracket available
  • Operating Mode: Bi-amplified w/ DSP
  • Operating Range: 49 Hz to 19 kHz
  • LF Transducers: 12.0″ ceramic magnet woofer, 3.0″ voice coil
  • HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
  • Power Handling at Nominal Impedance: LF 350 @ 8 Ω, HF/LF 400 W @ 8 Ω
  • Equalized Maximum SPL (peak / continuous): 133 dB / 127 dB

The DX1295 is a bi-amplified, 3-way coaxial loudspeaker that provides the output and pattern control of two 12 inch transducers in an enclosure size that would typically house a conventional 2-way system. Its coaxial transducer and 90° x 45° horn can be rotated in 45° increments, which allows its coverage to be tailored to an application’s requirements. The enclosure’s 40° trapezoidal shape may be mounted close to walls or in tight-packed horizontal arrays; alternatively, the enclosure may be rotated for mounting close to ceilings or in tight-packed vertical arrays.

Fulcrum Acoustic’s TQ™ processing is an integral part of the DX1295 design. Sound, innovative acoustical design combined with state of the art digital processing leads to the exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms.

The DX1295 is particularly effective in systems where targeted pattern control is desirable, and is an excellent solution for high fidelity, foreground distributed systems. Its clean aesthetic and compact size complements many architectural styles, which facilitates acceptance by interior designers and architects. This makes it the perfect choice for houses of worship, theaters, night clubs, transportation facilities, theme parks, and more.

120° x 60° Coverage Pattern

Optional YK2813 Yoke Bracket available
  • Operating Mode: Bi-amplified w/ DSP
  • Operating Range: 50 Hz to 19 kHz
  • LF Transducers: 12.0″ ceramic magnet woofer, 3.0″ voice coil
  • HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
  • Power Handling at Nominal Impedance: LF 350 @ 8 Ω, HF/LF 400 W @ 8 Ω
  • Equalized Maximum SPL (peak / continuous): 132 dB / 126 dB

The DX1226 is a bi-amplified, 3-way coaxial loudspeaker that provides the output and pattern control of two 12 inch transducers in an enclosure size that would typically house a conventional 2-way system. Its coaxial transducer and 120° x 60° horn can be rotated in 45° increments, which allows its coverage to be tailored to an application’s requirements. The enclosure’s vertically trapezoidal shape allows it to be installed very close to ceilings or beneath large arrays with minimal effect on sightlines. Its unusually broad pattern is uniquely suited for use as the center channel in L-C-R systems, to solve difficult fill problems, and in many other applications.

Fulcrum Acoustic’s TQ™ processing is an integral part of the DX1226 design. Sound, innovative acoustical design combined with state of the art digital processing leads to the exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms.

The DX1226 is particularly effective in systems where targeted pattern control is desirable, and is an excellent solution for high fidelity, foreground distributed systems. Its clean aesthetic and compact size complements many architectural styles, which facilitates acceptance by interior designers and architects. This makes it the perfect choice for houses of worship, theaters, night clubs, transportation facilities, theme parks, and more.

Reviews

There are no reviews yet.

Be the first to review “Fulcrum Acoustic DX12 – Dual 12” Coaxial Loudspeaker”

Your email address will not be published. Required fields are marked *