Radial DiNET DAN-RX Receiver

$449.99

2-Channel Dante Network Receiver

Description

The Radial DiNET DAN-RX is a 2-channel Dante™ endpoint that allows you to easily output balanced audio from a Dante enabled network.

  • Stereo analog output device for Dante networks
  • Balanced XLR outputs for connection at mic or line level
  • Headphone amplifier for personal monitoring
  • 24bit/96kHz digital to analog conversion

Effortless digital audio distribution

The DAN-RX provides a simple way to take a stereo feed from a Dante network and convert it to analog audio for monitoring in any location. Balanced XLR outputs allow you to connect to professional audio equipment such as a mixing console, amplifier, or a pair of powered speakers. In addition, a local 3.5mm headphone output is equipped with its own level control to test audio before connection to the PA system or to monitor locally with headphones, making it useful in events that use personal monitor systems. The DAN-RX can be powered from an included external supply or any Power over Ethernet (PoE) network switch, and both of these options can be used simultaneously to provide redundancy for critical applications.

The DAN-RX provides two channels of balanced audio output anywhere on a Dante-enabled digital network. 24bit / 96kHz audio converters provide exceptional audio quality, with over 100dB of dynamic range and incredibly low distortion. A built-in headphone amp provides an easy way to test audio or use as a personal monitoring system with a local level control. 14-gauge steel housing and a bookend design protect the connectors and allow the DAN-RX to withstand the rigors of professional touring and rental without failure.

Specifications
Audio circuit type:High current balanced active output device
Number of channels:2
Frequency response:20Hz – 20kHz
Dynamic range:>100dB
Gain:8dBu max @ -6dBfs
Total harmonic distortion:0.007% @ -6dBfs
Output Impedance:150Ω
Noise:44.1kHz, 48kHz, 88.2kHz, and 96kHz (24 bit)
Features
Headphone
Input Connectors:RJ45 Ethernet
Output Connectors:XLR
Extras:3.5mm headphone for testing
General
Construction:14-gauge steel
Size (L x W x D):5″ x 3.31″ x 1.88″ (12.7cm x 8.4cm x 4.8cm)
Weight:1.45lb (0.66kg)
Shipping size (L x W x D):11.75″ x 4.75″ x 3″ (29.8cm x 12.1cm x 7.6cm)
Shipping weight:2.1lb (0.95kg)
Power:15VDC 400mA (included) or PoE
Conditions:For use in dry locations only between 5°C and 40°C
Warranty:Radial 3-year, transferable

Reviews

There are no reviews yet.

Be the first to review “Radial DiNET DAN-RX Receiver”

Your email address will not be published. Required fields are marked *