Description
Microtech Gefell M 950
- condenser microphone
- wide cardioid
- large diaphragm capsule
- PE diaphragm
- transistor pre-amplifier
- phantom powering P48
specification
The M 950 studio condenser microphone combines modern large diaphragm capsule technology with the latest in semiconductor circuit topology. They are specifically designed to meet the needs of professional and semi-professional users who demand the highest performance. The microphones are ideally suited for universal miking applications in broadcast and sound studios. They are also attractive for project studios. Applications include vocalists, announcers, dialog pickup, and as spot microphones for recording guitars, keyboard, percussion, wind, and string instruments.
The electronic impedance converter uses a perfected circuit topology. This design reduces the noise floor to an extremely low level while also raising the maximum output capability. As a result, these microphones have a clean, distortion-free sound over an extremely wide dynamic range. RFI susceptibility is very low.
technical data
| Polar pattern | wide cardioid | |
| Acoustic operating principle | pressure gradient transducer | |
| Frequency range | 20 Hz to 20.000 Hz | |
| Sensitivity at 1 kHz | 20 mV/PA | |
| Output impedance | 100 Ohm | |
| Noise level | CCIR 468-4 | 13 dB |
| DIN EN 60268-4 | 7 dB-A | |
| Signal-to-noise ratio | CCIR weighted | 81 dB |
| A-weighted | 87 dB | |
| SPL for THD 0,5 % | 142 dB | |
| Max. output level | R = 1 kOhm | 17 dBu |
| R = 10 kOhm | 18 dBu | |
| Dynamic range | 135 dB | |
| Current consumption | 3,6 mA | |
| Output connector | XLR3M | |
| Weight | 210 g | |
| Length | 118 mm | |
| Diameter | 45 mm | |
| Surface | satin nickel, dark bronze | |
product contents
| with microphone holder MH 93.1 in a wooden case in wooden case 180 mm x 106 mm x 78 mm |
