Description
Microtech Gefell M 930 Ts
- condenser microphone
- cardioid
- large diaphragm capsule
- PE diaphragm
- transistor pre-amplifier
- phantom powering P48
specification
The studio microphone M 930 Ts unifies approved large diaphragm capsule technology with an optimized output transformer and a newly developed circuit design. That attains a signal transmission with negligible distortion combined with a lower low-frequency response, a very low noise floor, and a high sound pressure level even at a high external load.Because of the compact dimensions of the M 930 Ts, it is ideally suited for applications where optical inconspicuousness and an absolute view of manuscripts and monitors are demanded. It can be placed on speaker desks in radio stations as well as for recordings of dialog pickups, audiobooks, and in dubbing studios. Moreover, it can be used as the main microphone for recordings of solo instruments or vocals, as a spot microphone for recording instrumental groups, and for setting up multichannel main microphone arrangements. There are accessories for XY-, ORTF- and INA 5 arrangements available. Because of the balanced low-impedance transformer output, the M 930 Ts can be used for longer cable lengths with negligible distortion.
technical data
Polar pattern | cardioid |
Acoustic operating principle | pressure gradient transducer |
Frequency range | 20 Hz to 20.000 Hz |
Sensitivity at 1 kHz | 23 mV/Pa |
Output impedance | 40 Ohm |
Noise level | CCIR 468-4 | 18 dB |
DIN EN 60268-4 | 7 dB-A |
Signal-to-noise ratio | CCIR weighted | 81 dB |
A-weighted | 87 dB |
SPL for THD 0,5 % | 142 dB |
Max. output level | R = 1 kOhm | 18 dBu |
R = 10 kOhm | 21 dBu |
Dynamic range | 135 dB |
| > 60 dB |
Current consumption | 6 mA |
Output connector | | XLR3M |
Weight | 273 g |
Length | 130 mm |
Diameter | 45 mm |
Surface | satin nickel, dark bronze |
product contents
with microphone holder MH 93.1 in a wooden case 180 mm x 106 mm x 78 mm |