QSC KW122 Active Loudspeaker

• 12-inch Woofer; 1.75-inch diaphragm compression driver
• 75° conical DMT coverage
• Maximum SPL 131 dB peak
• It also functions as a monitor floor wedge
• 1000-watt Class D power modules in all models (2 × 500 W continuous)
• Onboard mixer with two combo XLR and ¼⁻ᶦⁿᶜʰ inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
• Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance
• DMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound field
• Rugged, texture-painted birch enclosures
• Four-position Mic/Line gain (full-range models)
• Tour-grade 16 gauge steel grilles
• Comfortable ergonomic handles
• 35 mm pole sockets with Tilt-Direct™
• M10 rigging points for suspended installation

Standard KW Series Features

• Inputs, Outputs, and Mixing
  Combo XLR and 1/4-inch TRS inputs accept both mic- and line-level input while a set of RCA phono inputs (except KSub) allow additional connectivity to portable MP3 players, CD players, and line-level mixers. As many as three audio sources can be mixed internally and summed to a balanced output for “daisy-chaining” of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility.
• DEEP™
  Sophisticated digital signal processing provides greater low-frequency extension while precisely protecting the woofer from over-excursion.
• DMT
  Directivity Matched Transition matches the HF coverage angle to the natural coverage angle of the woofer for uniform frequency response over the entire coverage area.
• Axisymmetric Wave Guide
  The axisymmetric wave guide eliminates the phase distortions of typical asymmetric horns for more natural reproduction.
• 1000 Watts
  The same state-of-the-art, lightweight Class D amplifier module powers all the K and KW Series models.
• EQ Modes
  Optimize for a specific application with the simple flip of a switch.
• Energy Management
  Automatic standby mode conserves energy and extends the life of the loudspeaker.
• LED Operation
  Switch selectable: On (power indicator) / off (dark) / limit (limiter indication)
• Remote Control
  Easy-to-use remote gain control is ideal for installed applications.
• Pro Appearance
  Sleek lines and a full grille for a more professional look than other molded loudspeakers.
• Locking IEC Power Cable
  Help prevent unexpected interruptions.
• Connectivity
  Mic/line and RCA inputs along with onboard mixing controls allow greater flexibility.
• Tilt-Direct™ Pole Mount
  A simple turn of the dial is all it takes to alter the vertical directivity by 7.5 degrees.
• Suspension and Mounting
  With integrated threaded inserts, KW Series is equally at home in mounted or flown applications.
• Threaded Pole
  The KW181 subwoofer comes with a threaded pole for a snug, safe fit.
• Intrinsic Correction
  An exclusive QSC process that applies extensive acoustic measurements to noticeably improve audio quality.
• Class D
  Higher efficiency produces less heat and more sonic performance with a lower overall current draw.
• Protections
  QSC’s Guardrail™ technology protects your loudspeakers from over-excursion. On-demand cooling fans and thermal limiting prevent overheated electronics.