Description
QSC KW152 Active Loudspeaker
Features
- 15-inch Woofer; 1.75-inch diaphragm compression driver
- 60° conical DMT™ coverage
- Maximum SPL 133 dB peak
- 1000-watt Class D power modules in all models (2 x 500 W continuous)
- Onboard mixer with two combo XLR and ¼⁻ᶦⁿᶜʰ inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
- Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance
- Directivity Matched Transition® (DMT) ensures uniform coverage across the entire sound field
- Rugged, texture-painted birch enclosures
- Four-position Mic/Line gain (full-range models)
- Tour-grade 16 gauge steel grilles
- Comfortable ergonomic handles
- 35 mm pole sockets with Tilt-Direct™
- M10 rigging points for suspended installation
Standard KW Series Features
- Inputs, Outputs, and Mixing
Combo XLR and 1/4-inch TRS inputs accept both mic- and line-level input while a set of RCA phono inputs (except KSub) allow additional connectivity to portable MP3 players, CD players, and line-level mixers. As many as three audio sources can be mixed internally and summed to a balanced output for “daisy-chaining” of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility. - DEEP™
Sophisticated digital signal processing provides greater low-frequency extension while precisely protecting the woofer from over-excursion. - DMT™
Directivity Matched Transition® (DMT) matches the HF coverage angle to the natural coverage angle of the woofer for uniform frequency response over the entire coverage area. - Axisymmetric Wave Guide
The axisymmetric wave guide eliminates the phase distortions of typical asymmetric horns for more natural reproduction. - 1000 Watts
The same state-of-the-art, lightweight Class D amplifier module powers all the K and KW Series models. - EQ Modes
Optimize for a specific application with the simple flip of a switch. - Energy Management
Automatic standby mode conserves energy and extends the life of the loudspeaker. - LED Operation
Switch selectable: On (power indicator) / off (dark) / limit (limiter indication) - Remote Control
Easy-to-use remote gain control is ideal for installed applications. - Pro Appearance
Sleek lines and a full grille for a more professional look than other molded loudspeakers. - Locking IEC Power Cable
Help prevent unexpected interruptions. - Connectivity
Mic/line and RCA inputs along with onboard mixing controls allow greater flexibility. - Tilt-Direct™ Pole Mount
A simple turn of the dial is all it takes to alter the vertical directivity by 7.5 degrees. - Suspension and Mounting
With integrated threaded inserts, KW Series is equally at home in mounted or flown applications. - Threaded Pole
The KW181 subwoofer comes with a threaded pole for a snug, safe fit. - Intrinsic Correction
An exclusive QSC process that applies extensive acoustic measurements to noticeably improve audio quality. - Class D
Higher efficiency produces less heat and more sonic performance with a lower overall current draw. - Protections
QSC’s Guardrail™ technology protects your loudspeakers from over-excursion. On-demand cooling fans and thermal limiting prevent overheated electronics.
| SPECIFICATIONS | KW152 | |||||||||||||||
| Configuration | 15-inch 2-way trapezoidal | |||||||||||||||
| Transducers Low-frequency Mid-frequency High-frequency | 15-inch cone transducer- 1.75-inch diaphragm compression driver | |||||||||||||||
| Frequency Response (-6 dB) | 47 Hz to 18 kHz | |||||||||||||||
| Frequency Range (-10 dB) | 44 Hz to 20 kHz | |||||||||||||||
| Nominal Coverage (-6 dB) | 60° axisymmetric | |||||||||||||||
| Maximum SPL1 | 133 dB peak | |||||||||||||||
| Amplifier | ||||||||||||||||
| Power Output2 | 1000 W Class D (500 W LF + 500 W HF) continuous 2000 W peak | |||||||||||||||
| Input Impedance | Channel A XLR / ¼⁻ᶦⁿᶜʰ:
Channel B XLR / ¼⁻ᶦⁿᶜʰ: 38 kΩ balanced / 19 kΩ unbalanced | |||||||||||||||
| Controls | Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) | |||||||||||||||
| Indicators | Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings) | |||||||||||||||
| Connectors | Balanced female XLR/¼⁻ᶦⁿᶜʰ line/mic level input, Balanced female XLR/¼⁻ᶦⁿᶜʰ line level input, Dual Balanced male XLR full range line level out, Balanced male XLR “mix” out, Stereo RCA line level input, Remote gain control, Locking IEC power connector | |||||||||||||||
| Cooling | On-demand, 50 mm variable speed fan | |||||||||||||||
| Amplifier Protection | Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ | |||||||||||||||
| Transducer Protection | Thermal limiting, excursion limiting | |||||||||||||||
| AC Power Input | Universal power supply 100–240 VAC, 50 to 60 Hz | |||||||||||||||
| AC Power Consumption (1/8 Power) | 100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A | |||||||||||||||
| Enclosure | ||||||||||||||||
| Material | 15 mm painted birch plywood | |||||||||||||||
| Finish | Black textured paint | |||||||||||||||
| Grille | Black powder coated 16 gauge steel | |||||||||||||||
| Speaker Dimensions (H×W×D) | 816 × 445 × 386 mm 32.1 × 17.5 × 15.2 | |||||||||||||||
| Carton Dimensions (H×W×D) | 580 × 530 × 890 mm 22.8 × 20.9 × 35 in | |||||||||||||||
| Net Weight | 29 kg / 64 lb | |||||||||||||||
| Shipping Weight | 35.8 kg / 78.9 lb | |||||||||||||||
| Available Accessories | KW152 cover, KW M10 kit | |||||||||||||||
Reviews
There are no reviews yet.