Description
Radial ProD8
The Radial ProD8 is a high-performance 8-channel passive direct box optimized for keyboard rigs in professional touring, with redundant 1/4″ inputs for each channel and a completely passive design that requires no power to operate.
- High-density 8-channel rackmount DI for keyboards
- Reversible rack ears to optimize patching setup
- Withstands extreme dynamics from high-output sources
- Redundant inputs let you incorporate a backup system
Professional performance
The ProD8 features up to 8 direct box outputs in a single 1RU rack space for professional touring, with dual ¼” inputs on each channel to incorporate a backup system or connect up to 16 channels of audio at once. A ¼” TRS effects insert jack on each channel allows for connection to various effects devices while adding greater routing options, while a thru-put jack delivers a direct feed to the artist’s playback system. The front panel features isolated XLRs for balanced low-noise outputs, each equipped with ground lift and 180° polarity reverse switches.
Transformer driven for greater headroom & low noise
The engine inside the ProD8 is a custom-wound Eclipse ET-DB2 transformer that performs both impedance matching and balancing. Linear from 20Hz to 20kHz, it is able to withstand the extreme dynamics common with today’s digital keyboards. Unlike active circuits that overload and square wave when the rail voltage is exceeded, transformers saturate. This means that as the signal increases, the ProD8 naturally rounds out the tone producing a warm Bessel curve reminiscent of the very best vintage audio gear. The other significant advantage of this passive design is 100% galvanic isolation between the source and destination, which eliminates the hum and buzz caused by ground loops.
Adaptable Configuration
To enhance setup options, the Radial ProD8 is equipped with reversible rack ears. This handy feature allows the system tech to position the inputs on the front of the rack when interfacing with external keyboards or have them inside if the setup is predominantly equipped with rack modules.
The Radial ProD8 is an 8-channel 19″ rack-mountable direct box designed for professional concert touring. The feature set has been optimized for keyboards but as with any direct box, it is certainly suitable for use with instruments or playback systems. The passive signal path incorporates a custom-wound Eclipse ET-DB2 transformer and RF filtering that is able to withstand excessive signal levels without distortion while delivering a linear response across the audio spectrum.
Specifications | ||
---|---|---|
Audio circuit type: | Passive, transformer-based | |
Transformer: | Eclipse ET-DB2, 12:1 ratio | |
Number of channels: | 8 | |
Frequency response: | 20Hz ~ 18.5KHz (± 0.2dB) | |
Dynamic range: | 128dB | |
Total harmonic distortion: | 0.01% from 20Hz~20kHz @-10dB | |
Phase Deviation: | 1° @ 100Hz; 8° @ 20Hz | |
Input Impedance: | 140k Ohms, unbalanced | |
Output Impedance: | 150 Ohms, balanced | |
Maximum Input: | +18dB @ 20Hz | |
Features | ||
Input pad, 180° polarity reverse, Ground lift | ||
Input Connectors: | 1/4″ | |
Output Connectors: | XLR | |
General | ||
Construction: | 14 gauge steel chassis & outer shell | |
Size (L x W x D): | 19″ x 6.25″ x 1.75″ (48.3cm x 15.875cm x 4.45cm) | |
Weight: | 7.2lb (3.26 kg) | |
Shipping size (L x W x D): | 22″ x 10.375″ x 4.5″ (55.9cm x 26.4cm x 11.4cm) | |
Shipping weight: | 8.30lb (3.76 kg) | |
Power: | Passive, no power required | |
Conditions: | For use in dry locations only between 5°C and 40°C | |
Warranty: | Radial 3-year, transferable |
Reviews
There are no reviews yet.