Description
Lewitt Audio MTP 840 DM
- Dynamic vocal microphone
- Active mode to boost sensitivity
- Tailored vocal sound
- Low-cut settings
- Supercardioid pattern
Included: Microphone clip, Windscreen, Transport bag
Your mic cuts through the densest of live mixes.
The MTP 840 DM is a supercardioid handheld performance microphone. Its tailored frequency response ensures that your vocals will cut through every mix. The unique Active Mode boosts sensitivity by up to 12 dB while output impedance stays low.
Refined electronics and superior capsule design make the MTP 840 DM a unique tool for onstage use.
Active mode to boost sensitivity
Give your signal some extra gain.
Boost your signal by up to 12 dB via a phantom-powered amplifier in Active Mode for ear-catching realism and distortion-free sonic depth.
Tailored vocal sound
Plug in and rock. No EQ is required.
We tailored the frequency response to make your vocals cut through even the densest mix, with great presence and clarity.
Plus, you do not require an EQ to be heard. Just plug it in and perform.
Low-cut settings
Improve clarity.
Remove the mesh, and you’ll find switches to activate a low-cut at 150 Hz or 250 Hz to reduce structure-borne noise. You can tame the proximity effect and adapt the mic to your individual preference.
Supercardioid polar pattern
Be fully protected against feedback.
The supercardioid polar pattern allows for high gain before feedback and guarantees maximum isolation of your voice – side and rear sounds are effectively rejected.
Specifications
- Type
- Dynamic, moving coil
- Acoustical operating principle
- Pressure gradient transducer
- Polar pattern
- Supercardioid
- Frequency range
- 40 … 18,000 Hz
- Sensitivity
- 3.5 mV/Pa, -49 dBV/Pa
- Signal/noise ratio
- 75 dB (A)
- Self-noise
- 19 dB (A)
- Dynamic range, passive mode
- 135 dB
- Dynamic range, active mode
- 121 dB, 0 dB gain
115 dB, 6 dB gain
109 dB, 12 dB gain
- Gain settings, active mode
- 0 dB, 6 dB, 12 dB
- Low-cut filter
- linear
150 Hz (12 dB/oct)
250 Hz (12 dB/oct)
- Internal impedance
- 600 Ω
- Supply voltage
- 48 V ± 4 V
- Current consumption
- 5.5 mA
- Connector
- Gold-plated 3-pin XLR
- Microphone dimensions
- 51 dia. x 183 mm, 2 dia. x 7.2 in
- Microphone net weight
- 336 g, 11.85 oz
Microphones measured according to IEC 60268-4 | Phantom power according to IEC 61938 | Noise measurement according to IEC 60268-1
Reviews
There are no reviews yet.