Category:

Fulcrum Acoustic DX15 – Dual 15” Coaxial Loudspeaker

Fulcrum Acoustic TQ Install Speaker. Please specify coverage.

About this item

Product

Description

The Fulcrum Acoustic DX Series 3-way loudspeakers provide the output and pattern control of two low-frequency transducers in an enclosure size that would typically house a conventional 2-way system. They include a single-neodymium-magnet coaxial transducer and a powerful ceramic magnet low-frequency transducer. The two low-frequency devices both operate down to the lowest frequencies, resulting in a mutual coupling that provides unusually high efficiency and impacts in the critical 80 Hz to 500 Hz range. The dual 15-inch models offer a choice of 60° x 45°, 75° x 75°, 90° x 45°, or 120° x 60° horns.

Available in:

60° x 45°

75° x 75°

90° x 45°

120° x 60°

 

60° x 45° Coverage Pattern

  • Operating Mode: Bi-amplified w/ DSP
  • Operating Range: 42 Hz to 20 kHz
  • LF Transducers: 15.0″ ceramic magnet woofer, 4.0″ voice coil
  • HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single neodymium magnet
  • Power Handling at Nominal Impedance: LF 700 @ 8 Ω, HF/LF 400 W @ 8 Ω
  • Equalized Maximum SPL (peak / continuous): 133 dB / 127 dB

The DX1565 is a bi-amplified, 3-way coaxial loudspeaker that provides the output and pattern control of two 15 inch transducers in an enclosure size that would typically house a conventional 2-way system. Its coaxial transducer and 60° x 45° horn can be rotated in 45° increments, which allows its coverage to be tailored to an application’s requirements. The enclosure’s 40° trapezoidal shape may be mounted close to walls or in tight-packed horizontal arrays; alternatively, the enclosure may be rotated for mounting close to ceilings or in tight-packed vertical arrays.

Fulcrum Acoustic’s TQ™ processing is an integral part of the DX1565 design. Sound, innovative acoustical design combined with state of the art digital processing leads to the exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms.

The DX1565 is particularly effective in systems where targeted pattern control is desirable, and is an excellent solution for high fidelity, foreground distributed systems. Its clean aesthetic and compact size complements many architectural styles, which facilitates acceptance by interior designers and architects. This makes it the perfect choice for houses of worship, theaters, night clubs, transportation facilities, theme parks, and more.

 

75° x 75° Coverage Pattern

  • Operating Mode: Bi-amplified w/ DSP
  • Operating Range: 42 Hz to 20 kHz
  • LF Transducers: 15.0″ ceramic magnet woofer, 4.0″ voice coil
  • HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single neodymium magnet
  • Power Handling at Nominal Impedance: LF 700 @ 8 Ω, HF/LF 400 W @ 8 Ω
  • Equalized Maximum SPL (peak / continuous): 134 dB / 128 dB

The DX1577 is a bi-amplified, 3-way coaxial loudspeaker that provides the output and pattern control of two 15 inch transducers in an enclosure size that would typically house a conventional 2-way system. Its coaxial transducer and 75° x 75° horn provide effective coverage in situations where traditional 45° and 60° vertical patterns are too narrow. The enclosure’s 40° trapezoidal shape may be mounted close to walls or in tight-packed horizontal arrays; alternatively, the enclosure may be rotated for mounting close to ceilings or in tight-packed vertical arrays.

Fulcrum Acoustic’s TQ™ processing is an integral part of the DX1577 design. Sound, innovative acoustical design combined with state of the art digital processing leads to the exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms.

The DX1577 is particularly effective in systems where targeted pattern control is desirable, and is an excellent solution for high fidelity, foreground distributed systems. Its clean aesthetic and compact size complements many architectural styles, which facilitates acceptance by interior designers and architects. This makes it the perfect choice for houses of worship, theaters, night clubs, transportation facilities, theme parks, and more.

 

90° x 45° Coverage Pattern

  • Operating Mode: Bi-amplified w/ DSP
  • Operating Range: 42 Hz to 20 kHz
  • LF Transducers: 15.0″ ceramic magnet woofer, 4.0″ voice coil
  • HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single neodymium magnet
  • Power Handling at Nominal Impedance: LF 700 @ 8 Ω, HF/LF 400 W @ 8 Ω
  • Equalized Maximum SPL (peak / continuous): 135 dB / 129 dB

The DX1595 is a bi-amplified, 3-way coaxial loudspeaker that provides the output and pattern control of two 15 inch transducers in an enclosure size that would typically house a conventional 2-way system. Its coaxial transducer and 90° x 45° horn can be rotated in 45° increments, which allows its coverage to be tailored to an application’s requirements. The enclosure’s 40° trapezoidal shape may be mounted close to walls or in tight-packed horizontal arrays; alternatively, the enclosure may be rotated for mounting close to ceilings or in tight-packed vertical arrays.

Fulcrum Acoustic’s TQ™ processing is an integral part of the DX1595 design. Sound, innovative acoustical design combined with state of the art digital processing leads to the exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms.

The DX1595 is particularly effective in systems where targeted pattern control is desirable, and is an excellent solution for high fidelity, foreground distributed systems. Its clean aesthetic and compact size complements many architectural styles, which facilitates acceptance by interior designers and architects. This makes it the perfect choice for houses of worship, theaters, night clubs, transportation facilities, theme parks, and more.

 

120° x 60° Coverage Pattern

  • Operating Mode: Bi-amplified w/ DSP
  • Operating Range: 42 Hz to 20 kHz
  • LF Transducers: 15.0″ ceramic magnet woofer, 4.0″ voice coil
  • HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single neodymium magnet
  • Power Handling at Nominal Impedance: LF 700 @ 8 Ω, HF/LF 400 W @ 8 Ω
  • Equalized Maximum SPL (peak / continuous): 134 dB / 128 dB

The DX1526 is a bi-amplified, 3-way coaxial loudspeaker that provides the output and pattern control of two 15 inch transducers in an enclosure size that would typically house a conventional 2-way system. Its coaxial transducer and 120° x 60° horn can be rotated in 45° increments, which allows its coverage to be tailored to an application’s requirements. The enclosure’s vertically trapezoidal shape allows it to be installed very close to ceilings or beneath large arrays with minimal effect on sightlines. Its unusually broad pattern is uniquely suited for use as the center channel in L-C-R systems, to solve difficult fill problems, and in many other applications.

Fulcrum Acoustic’s TQ™ processing is an integral part of the DX1526 design. Sound, innovative acoustical design combined with state of the art digital processing leads to the exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms.

The DX1526 is particularly effective in systems where targeted pattern control is desirable, and is an excellent solution for high fidelity, foreground distributed systems. Its clean aesthetic and compact size complements many architectural styles, which facilitates acceptance by interior designers and architects. This makes it the perfect choice for houses of worship, theaters, night clubs, transportation facilities, theme parks, and more.

 

Reviews

There are no reviews yet.

Be the first to review “Fulcrum Acoustic DX15 – Dual 15” Coaxial Loudspeaker”

Your email address will not be published. Required fields are marked *

This product was featured in our Installation projects

Projects

The Huntington Theatre Company is a famous non-profit performing arts organization located in Boston, Massachusetts. It was established in 1982 and has since developed into

Our mission at Parsons Audio is to provide solutions that help engineers, educators, musicians, studio, and venue owners realize their goals. When the owners of

2022 has been a busy year for us here at Parson’s Audio. We’ve been busy doing sound system installations all over New England. The Groton

Different Solutions For You

Services

Professional Installation Services

Flawless audio systems for studios and venues

Discover

Audio Solutions for Education

Elevate learning experiences with tailored audio solutions

Discover

Outstanding Video Solutions

Visual experiences with state-of-the-art video technology

Discover