Radial DiNET DAN-TX Transmitter

2-Channel Dante Network Transmitter


The Radial DiNET DAN-TX is a 2-channel Dante™ transmitter for adding instrument or line-level inputs to any Dante system.

  • Stereo analog input device for Dante networks
  • Connect instruments or line-level sources
  • ¼”, RCA and 3.5mm stereo TRS inputs
  • 24bit/96kHz analog to digital conversion

More ways than ever to connect over Dante

Need to connect a smartphone, tablet, or any playback device to a Dante network? How about an electric guitar, while still feeding an amp on stage? The DAN-TX can do it all. In fact, with signal handling of up to +24dB, you can connect the line-level outputs of a mixing console to the DAN-TX without breaking a sweat. A local-level control allows you to adjust as needed, and a number of input connector types ensures you won’t be digging around for an adaptor cable at a critical moment. No matter what source you’re using, the DAN-TX is the easiest way to get your analog audio onto a Dante network.

The DiNET DAN-TX is a robust solution for interfacing analog audio gear with a digital Dante-enabled network. Inputs are provided for ¼”, RCA, and 3.5mm connections; so instruments, mobile phones, tablets, and professional audio gear can be seamlessly integrated. The DAN-TX handles signal levels up to +24dB, so even the hottest outputs can be used without overloading the device. Side switches allow you to configure the DAN-TX for use with either instruments or line-level devices, engage a -20dB pad, or utilize a high-pass filter when needed. 24bit / 96kHz converters ensure the best possible audio quality, and 14-gauge steel construction ensures the DAN-TX will stand up to the toughest touring conditions.

Audio circuit type:High current balanced active input device
Number of channels:2
Frequency response:20Hz – 20kHz
Dynamic range:>103dB
Total harmonic distortion:0.008% @ -6dBfs
Intermodulation Distortion:0.0017% -10dBfs
Input Impedance:Unbal 240kΩ (20kΩ Line Mode), Bal 40kΩ,
Noise:-98dB (EIN)
Noise:44.1kHz, 48kHz, 88.2kHz, and 96kHz (24bit)
Input pad, HPF, Level Control
Input Connectors:1/4″ TRS, 3.5mm & RCA
Output Connectors:RJ45 Ethernet
Extras:Instrument or Line Mode
Construction:14-gauge steel
Size (L x W x D):5″ x 3.31″ x 1.88″ (12.7cm x 8.4cm x 4.8cm)
Weight:1.45lb (0.66kg)
Shipping size (L x W x D):11.75″ x 4.75″ x 3″ (29.8cm x 12.1cm x 7.6cm)
Shipping weight:2.1lb (0.95kg)
Power:15VDC 400mA (included) or PoE
Conditions:For use in dry locations only between 5°C and 40°C
Warranty:Radial 3-year, transferable


There are no reviews yet.

Be the first to review “Radial DiNET DAN-TX Transmitter”

Your email address will not be published. Required fields are marked *