Description
The Radial Headlight is a unity gain guitar amp selector designed to easily integrate onto a pedalboard and provide the ability to switch between as many as four amplifiers with a single footswitch.
- Four output amp switcher with sequential switching
- Isolated outputs to eliminate hum and buzz
- Compact footprint easily fits on a pedalboard
- Mute footswitch for silent on-stage tuning
Small Size, Big Tone
The Headlight has a compact footprint that will fit on any pedalboard, but it’s still powerful enough to drive up to four amplifiers without sacrificing on tone. The input features a class-A buffer along with Drag Control load correction that allows you to optimize the impedance for your pickups and recreate the feel of plugging your guitar directly into an amp. Custom transformers isolate the outputs to prevent buzz and hum from ground loops, with ground lift switches to further alleviate noise problems. Should you really want to get loud, the mute footswitch can be configured as an ‘all on’ switch, activating all four amp outputs simultaneously.
Specifications | ||
---|---|---|
Audio circuit type: | Classic Class-A FET | |
Frequency response: | 30Hz – 30kHz | |
Dynamic range: | 116dBu | |
Gain: | -0.5dBu | |
Clip Level: | +7dB | |
Total harmonic distortion: | 0.01% | |
Intermodulation Distortion: | 0.02% | |
Phase Deviation: | -1.35° @ -20dBu / 1kHz | |
Input Impedance: | 20k to 1MΩ | |
Output Impedance: | 1kΩ | |
Noise: | -112dBu | |
Maximum Input: | +8dB | |
Features | ||
180° polarity reverse, Ground lift, Drag Control | ||
Input Connectors: | 1/4″ | |
Output Connectors: | 1/4″ | |
General | ||
Construction: | 14-Gauge Steel | |
Size (L x W x D): | 5″ x 4.7″ x 2″ | |
Weight: | 2lb | |
Shipping size (L x W x D): | 6.5″ x 5.1″ x 2.5″ | |
Shipping weight: | 2.4lb | |
Power: | 9V adaptor / 80mA (Center Pin Negative) | |
Conditions: | For use in dry locations only between 5°C and 40°C | |
Warranty: | Radial 3-year, transferable |
Reviews
There are no reviews yet.