Radial ProD2

$149.99

Stereo Passive Direct Box

Description

The ProD2 is a 2-channel passive direct box designed to connect stereo keyboards or high output instruments to a PA system or home recording setup without noise or distortion.

  • A stereo direct box designed for keyboards
  • Smooth, warm sound rounds out digital edge
  • Able to handle huge transients without choking
  • Maybe rack-mounted for touring rigs

World-class DI

At the heart of the design are two high-performance Eclipse ET-DB2 transformers. These deliver 20Hz to 20kHz performance with less than 1.5dB deviation above 18kHz and are able to withstand tremendous signal levels without distortion. Unlike active circuits that overload when the signal exceeds the rail voltage, transformers saturate. This creates a pleasing effect that naturally rounds out the tone, acting like a subtle limiter which is particularly advantageous when interfacing the ProD2 with digital pianos, samplers and drum machines that can produce excessive dynamics. Transformers are particularly adept at eliminating hum and buzz caused by ground loops.

The ProD2 is a high-quality ultra-compact stereo passive direct box that features custom-made Radial transformers. Essentially two ProDIs in one compact enclosure the ProD2 is a great choice for stereo keyboards, DJ equipment, and consumer hi-fi systems. Its high-performance transformer has an exceptionally linear frequency response from 20Hz to 18kHz and is able to handle high signal levels without saturation making it ideal for electronic instruments. The ProD2 is housed in an extremely rugged two-piece 14 gauge steel enclosure with a book-end designed outer shell that prevents damage to the switches, features a -15dB PAD for high output sources and ground lift switch to troubleshoot noise from ground loops.

Specifications
Audio circuit type:Passive, transformer-based
Transformer:Eclipse ET-DB2, 12:1 ratio
Number of channels:2
Frequency response:20Hz ~ 18.5KHz (± 0.2dB)
Dynamic range:128dB
Total harmonic distortion:0.01% from 20Hz~20kHz @-10dB
Phase Deviation:1° @ 100Hz; 8° @ 20Hz
Input Impedance:140k Ohms, unbalanced
Output Impedance:150 Ohms, balanced
Maximum Input:+18dB @ 20Hz
Features
Input pad, 180° polarity reverse, Ground lift
Input Connectors:1/4″
Output Connectors:XLR, 1/4″ thru
General
Construction:14 gauge steel chassis & outer shell
Size (L x W x D):5″ x 3.3″ x 1.8″ (127mm x 84.1mm x 45.5mm)
Weight:.54kg (1.2lbs)
Shipping size (L x W x D):6.5″ x 4″ x 3″ (165mm x 102mm x 76mm)
Shipping weight:0.61 kg (1.35 lbs)
Power:Passive, no power required
Conditions:For use in dry locations only between 5°C and 40°C
Warranty:Radial 3-year, transferable

Reviews

There are no reviews yet.

Be the first to review “Radial ProD2”

Your email address will not be published. Required fields are marked *