Description
The Radial Twinline is a unique device that enables a guitarist to share effects pedals between two amps when using each amplifier’s built-in effects loop.
- Share your pedalboard between two amp effects loops
- Optimize signal levels for each amplifier
- Works with guitar pedals or balanced studio effects
- Can be remotely controlled using a footswitch
Access all of your pedals with multiple amps
The Twinline can be thought of like a pedalboard switcher that lets you remotely toggle effects pedals from one amp’s effects loop to the other, effectively sharing your pedalboard between two amps. To accomplish this, the Twinline is equipped with two amplifier effects loop circuits – each with separate send and receive levels to optimize the signal path for each amp’s effects loop. Effects devices can be connected to the Twinline with unbalanced ¼” connectors for typical guitar pedals or balanced XLR connections for studio effects. To switch or bypass effects from across the stage, a remote control input allows you to toggle the Twinline using a latching footswitch.
The Twinline is an effects loop router that may be remotely switched to follow the active amplifier in an advanced stage setup. This enables the pedalboard or effects rack to utilize the two amplifier rear-panel effects loops while sharing the same effects. The circuit design is optimized to work from -30dB to +10dB, providing plenty of range for both guitar pedals and professional studio effects while introducing minimal artefact.
| Specifications | ||
|---|---|---|
| Audio circuit type: | Class-A FET with transformer isolation | |
| Dynamic range: | 105dB | |
| Gain: | Variable from -2.7dB ~ +3.6dB (From Amp Jack to EFX Send) | |
| Total harmonic distortion: | 0.005% @ 1kHz | |
| Intermodulation Distortion: | 0.01% | |
| Input Impedance: | 10KΩ (From Amp), 1MΩ (FX Return) | |
| Output Impedance: | 2200Ω (To Amp), 1KΩ (FX Send) | |
| Common Mode Rejection Ratio: | 91dB @ 55Hz | |
| Equivalent Input Noise: | -103dB | |
| Noise: | -92dBu | |
| Maximum Input: | +25dBu (From Amp Jack), +8dBu (FX Input) | |
| Features | ||
| Ground lift, Effects Loop | ||
| Input Connectors: | Balanced ¼” TRS or unbalanced ¼” | |
| Output Connectors: | Balanced ¼” TRS or unbalanced ¼” | |
| Extras: | Unity Gain Control Position: About 10 O’Clock on send & return EFX | |
| General | ||
| Construction: | 14-gauge steel | |
| Size (L x W x D): | 4.3″ x 1.9″ x 5.8″ (109mm x 48mm x 147mm) | |
| Weight: | 2.4lbs (1.1kg) | |
| Shipping size (L x W x D): | 4.7″ x 2.6″ x 11.6″ (119mm x 66mm x 294mm) | |
| Shipping weight: | 3.4lbs (1.54kg) | |
| Power: | 15V 100mA Unregulated/Center Pin Positive | |
| Conditions: | For use in dry locations only between 5°C and 40°C | |
| Warranty: | Radial 3-year, transferable | |
Reviews
There are no reviews yet.